We're located about an hour west of Toronto, in southern Ontario.
Address
244 Woolwich St S, Unit 4, Breslau Ontario. N0B 1M0
Hours
Monday - Friday
Please call before coming.
Saturday
Closed
Sunday
Closed
ONLINE STORE
Problem Solving Hot Rod Chassis Parts Since 1978
Shop Now
Classic Rods & More (Lynchburg, VA) and Welder Series can now provide you with a PROVEN MII IFS Kit for your 1928-31 Ford Model A that will give you a low stance and maintain your wheels in the center of the front fenders. This IFS has been produced and used for a number of years by one of the owners of Classic Rods & More and maintains the stock MII geometry. It does not require bubbling the front fenders in order to clear the A-Arms. The front splash apron will require modification. 2″ dropped spindles and 1″ narrowed A arms required. Front end alignment is achieved by using stock MII specifications.
The kit will not require any additional manufacturing to install. Once the kit is welded just place the crossmember on the front axle centerline, place the tower centerline on the same front axle centerline on the outside of the frame rails and weld in place.
Available welded or as a ready-to-weld kit.
Hub-to-hub kits are available from Classic Rods & More and other dealers who assemble complete Mustang II kits.
The sedan in the pictures is using this crossmember with 15×6 wheels.
Every customer is different. You’re different from the next customer. That’s why they’re called 'custom'ers. There is no formula, no equation that will work with all of you. It takes a different approach to everyone to determine how best to serve anyone. Some people need videos, some people need descriptions. Some people need us to weld it together. Our approach has been, and will always be, to serve each of you where you are and to treat you the same way we would like to be treated. We officially opened the doors to Welder Series in 2005. That doesn’t sound like very long, because the product line has been percolating for over 40. Paul Horton began developing and building many of the parts we still manufacture when I wasn’t yet a twinkle in Dorothy’s eye. Thanks very much for your business and support over the years.
-Paul, Dorothy, and DW (me) Horton
Note DW and Paul Horton at Welder Series absolutely rock and were quick, prompt, by far the best communication I’ve had with an online vendor in a LONG LONG TIME… (Sorry but their response time was bar none awesome). Very rarely do you find the level of dedication to a customer, communication, and a rewarding experience for both the buyer and supplier. I bought a pedal assembly a bit ago, and that experience automatically ensured that I will source Welder Series before I search for another vendor. Paul and DW have it together and will make a solution to your problem… and probably at the best price around to boot.
I have purchased a few of the products that Welder Series offers and been pleased each time. The products are as advertised and they ship in a timely manner.
I am also impressed with their customer service. I asked them if they had a brake pedal kit (mount, pivot, pedal, bushings, etc) for a right hand drive application. They did not have a kit per se but were able to put together pieces from their catalog to make one I could modify the Master Cylinder mount to make it face the other way (I had to cut the top off and weld it back on facing the other way, cheaper than ordering a one off part, and I don’t have a way to bend metal that thick, everything else fit up as intended). It worked as they described.
I just finished installing a Welder Series rear sway bar kit over the weekend. My all-steel ’35 sedan handled in the traditional “scrape off the running boards” way… even with a front sway bar. The kit went together nicely, everything fit perfectly and now the car goes around a corner 100% better… no more extreme lean. DW was a huge help in putting together a little bit different kit for me since I am using a tubular rear crossmember and also made some suggestions that really helped in the fabrication. You can depend on these guys… they are “for real” hot rod guys that offer really cool products. I’ll post a picture or two when I get the chance to put the car on a hoist for a better photo op. Thanks DW & crew.
DW Horton
Son of Paul (and Dorothy)
Welder Series is a family business focused on serving our customers with consistently high quality parts, exceptional service and support, and reasonable prices.
We're located about an hour west of Toronto, in southern Ontario.
Hours
Monday - Friday
Please call before coming.
Saturday
Closed
Sunday
Closed